Valentines Day Cards in a non traditional sense- Unity Stamp Co.

I think we all can agree that my style of crafting is not exactly... well traditional. I have grown to really love what I do and through the process I have come to the realization that I tend to lean towards the artsy, colorful and re-purposed style of crafting... and I couldn't be happier.

I am trying to expand my horizons, as I have found that the reason that I do lean towards the artsy distressed style is not because clean and simple couldn't be a style I create... more or less to draw or cut a straight line kinda frightens me. I hide my mistakes with paint, flowers and inks... lol. But I am going to try and create some simpler designs because I love love love the look of it.

Today I created some non-traditional "Not yo' momma's" Valentines Day cards. These cards were for examples at CHA, of the New Crafters Inks by Clearsnap Inc. Both of these greeting cards were created using my new background stamps from Unity Stamp Co.

4 YOU greeting card

Products used: cardstock (Bazzill Basics), Inks, Glitter, and embossing powder (Clearsnap Inc), Stamps (Liz Hicks Studios for Unity Stamp Co.), Pen (Sakura of America), sequin and vintage paper (Unknown), Dry adhesive (Scrapbook Adhesives by 3L) and wet adhesive (Beacon Adhesives)

Foreground and background: use rich colors to create your focal point like I did using Collage of Digits here. I added some visual interest to the background by layering my stamps over tinted vintage paper. Using Dinged Dots and I.Kat along the side helps to break up the boldness of the main stamp.

 

Layer Colors and Patterns: The happening trend right now in fashion is not only color blocking BUT also blocking with complimentary patterns. Use analogous or complimentary colors with my stamps to create beautiful layered effects like you see above. I used three different colors and 3 different stamps to create this colorful collage.

Isolate a number and use it to your benefit: Here I added glittered embossing powder to the #4 to use it for my sentiment.

 Love You Card

Products used: Cardstock (Bazzill Basics), Inks and embossing powder (Clearsnap Inc.), Stamps (Liz Hicks Studios for Unity Stamp Co.), Pen (Sakura of America), Punchinella and Vintage paper (unknown), Dry adhesive (Scrapbook Adhesives by 3L) and wet adhesive (Beacon Adhesives)

Make a bold impression: Use a repetitive pattern (Like the hearts here) in bold colors to allow the stamped background to fade. Taking the visual interest off of the background with this bold heart pattern allows the viewer to see the hearts first and notice the background secondary, which translates really well as perceived depth.

Outline to define: Use a dark pen to outline letters or patterns that may otherwise get lost in the background.

Since this post IS a part of our Launch Party with UNITY STAMP CO. I want to remind you of our giveaways taking place till February 2nd 2013. Check them out here. 

I used ALL 4 of the background stamps on the first card and Dinged Dots & my alphabet on the second.

These background stamps are on sale for only $8.99 AND my Alphabet is only $20 right now. To add to the amazing prices... $1 of every sale goes to help Melody Ross with her work for Full Circle Exchange in bringing awareness and assistance to those involved in Human Trafficking. Sale is for this weekend only so grab them while you can. You can order your Unity Stamps right here.

Also make sure to check out the brand new LIZ HICKS STUDIOS facebook page that we created to keep track of all of the good stuff we are doing with Liz Hicks Studios. If you didn't know... Liz Hicks Studios is not just me, it is my family as well but mostly me and my husband. This is our families joint effort and I would love for you to check out what we are doing next by checking out our page here.

There is a whole lot of fun things going on this year... this is just the beginning. I hope you enjoyed these cards and the details that I have shared. With explaining them as I did, I hope that you can take this info and find ways to make it useful in your crafting.

Thanks for stopping by!

~Liz Hicks

Super cute and EASY Wrist Warmers (Re-purposed)- tutorial

This season I made it a point to try and stretch myself creatively and give a handmade gift to some of my closest friends. While some of my friends are artsy... not all of them are. So in an attempt to find something I could make with my hands, yet still make my non-artsy friends (Ah-hem... PATTI) happy, I came up with this quick and easy solution.

My friend Patti asked me for wrist warmers for Christmas. Patti and I have worked together in the past, and she has seen me get crafty on more than one occasion... but in this circumstance...I think she thought I was a little more crafty than I actually am. When she was explaining to me what she wanted she kept talking about crocheting a tube...yada yada yada... The truth is I can crochet a chain, and well anything that can be made from a very simple chain. At this point she lost me. 

So instead of thoroughly handmaking her wrist warmers, I decided to experiment and re-purpose. 

I went to the local thrift store and bought a few old wool sweaters. From here I took them back and washed and dried them a few times to felt the wool really tight. After the sweaters were ready I proceeded to cut strategically to create her wrist warmers.

To Cut, First cut the entire sleeve off of your sweater. This will leave you with two sleeves to work with. 

From here, stack your sleeves so that they are lined up perfectly.

Cut your sleeves to about 14 inches long, so that both sleeves are the exact same length. 

If your sweaters have sleeves that are thin and balloon out wider, the final measurements of the cuffs are roughly 14inches long, and 3 inches wide (I measured a pair I already had for this).

To finish off, rip the seem of your sleeve to create a thumb hole. In the picture below you will see I left about two inches from the top. Depending on how long you want your overhanging cuff to lay over your fingers, you can go anywhere from 1-2.5 inches from the top of the overhanging cuff. To Finish off, I added a blanket stitch just for some added detail.

 You can see here that on the opposite end of the cuff that I did a tight zig zag stitch on my sewing machine. From here I simply trimmed off any excess fabric that stuck out of the zig zag stitch.

Here is how the final product looks while in use. This pair is for our friend Lisa who likes purple.

 To wrap these, I just used a small bit of tulle tied in a cute little bow.

 Of course once you find something really cool to make, the rest of your friends start to drop hints that they might like a pair. So here are a few other sweaters I have picked up along the way for our other friends. The purple pair above were not actually made of wool (you'd be surprised just how hard it is to find purple wool sweaters!) so if you are not a fan of wool, a cotton, acrylic, angora or cashmere substitute should work just fine. The main thing to consider is that your zig zag finish can keep the material from shredding.

Supplies used: Old Sweater, sewing thread, sewing machine (If you don't have one you can finish the edge off by hand just use a tight stitch) and embroidery thread (I used Bazzill Basics, In Stitches thread.)

This is also great if you have sweaters that either you or your husband (not mentioning any names ☺) "accidentally" shrink your cozy wool sweaters. This is a wonderful way of giving them a new purpose and also letting your husband off the hook.

I hope this finds you all well and that it is helpful to you. It is really a simple project, but if you have any questions... feel free to email me :)  I would love to help!

~Liz ♥

Live from CHA- Charity Wings and CHA events

Live at CHA! This year... I have the opportunity to work with Charity Wings and their Live at CHA event. SCRAPBOOK ADHESIVES BY 3L, Clearsnap, Bazzill and Unity Stamp Co. Have generously donated product for this sweet little make and take that we will be demonstrating. We will be LIVE at 11am THIS Saturday, If you are interested... contact Elena at (charitywings@yahoo(dot).com).

We will also be live with CHA sharing the newest in SCRAPBOOK ADHESIVES BY 3L products.

Here is what CHA is advertising...

"CHA will be webcasting the hottest products live from the Show floor for 2 hours a day. That’s right EVERY NEW PRODUCT that is entered into the Innovations Product Showcase will receive a 3-minute interview on CHA-TV. CHA-TV is a free webcast portal for the craft & hobby industry. CHA will use this new resource to webcast the hottest new product launches live from the upcoming 2011 Winter Show. Two-time Emmy Award winner and CHA’s National Spokesperson Terri O will be conducting the daily interviews from 11 am – 12 pm and 1 pm – 2 pm PT live from the CHA-TV Broadcast booth on the Show floor. You'll need to download the free CHA-TV Facebook app at http://apps.facebook.com/craftandhobby or view it live on the web at http://www.linqto.com/rooms/craftandhobby/. at http://www.linqto.com/rooms/craftandhobby in order to view the webcast. "

SCRAPBOOK ADHESIVES BY 3L will be LIVE this Saturday at 1:30pm.


What a great way to be a part of the event... right from your own HOME!

Hope to see you there!

~Liz